Thetford C2 Flush switch repair

Thetford C2 Flush switch repair
by Ukcampsite.co.uk member Floggitt

I have had an intermittent fault with the electric flush on the C2 Thetford toilet fitted in our van. I have already changed the pump and flushed out the top tank so when it happened again last trip it was bothering me. And decided it had to be the switch or electrics playing up rather than suspecting a second pump.

Working from inside take off the cover cap on the flush knob and with a long pozi screwdriver remove the screw down inside the shaft and lift the knob up and out.

Then working from outside pull off the white plastic cover

Undo the 4 pozi-screws 2 at the front 2 at the back are a bit hard to get too.

Now drop down the grey plastic bit it has the flush wiring and switches in it.

Disconnect the 2 plugs and the unit is free

No need for any electrical tests here I can see the problem already.
The fuse holder is so corroded it won't work.

So an electrical repair to that and the whole lot can be refitted and job done!

Download in PDF Format

Frequently Asked Questions

Handy Hints and Tips

Instruction Manuals & DIY

Disclaimer - The information provided on this Website site is offered with no warranty as to the authenticity, suitability or competence of the individual, company or service quoted here in. The Website shall not be liable for any damage or difficulty, direct or indirect, arising from utilization of the information contained within these pages. Thomson T-Line History & Information is not responsible for the content of external website's.