| Paneling |
| We used the same technique we had perfected when doing the rear of the caravan to fit the panels. |
 |
 |
| Once Annette had made the paper templates we transferred the shape onto the plywood using the jigsaw we cut the panel and fine tuned the shape using the electric mouse sander so it fitted into the space nice and snugly. |
 |
 |
| Some of the places we had to reach were very restricted especially in where we now call the cellar. |
 |
| Other places needed some very artistic work with a jig saw ( yes Annette did cut this one out) |
 |
 |
| Once the final sanding had be done and the panels fitted perfectly they would be glued and stapled into place |
 |
 |
| Finally Annette had worked her magic and the caravan is ready for total decoration inside. |
 |
| BUILD UP |
RE-GLAZING |
|